Elbow Crutch Tripods
$13.50
Skip to product information
Elbow Crutch Tripods
$13.50
A practical tripod attachment that keeps your elbow crutch standing upright on its own, with no need to lean it against a wall. You can keep walking with the tripod installed, so it's there whenever you need to set the crutch down hands-free.
- Keeps the crutch upright without external support.
- Walking is possible with the tripod fitted.
- Compatible with all FDI elbow crutch and walking stick models.
Browse all crutch accessories or the full forearm crutch range. Fast shipping Australia-wide.
You may also like
Commitment to quality.
In order to guarantee the quality, FDI selects its raw material suppliers with the utmost care. All suppliers meet international standards and are able to provide the relevant certificates.
The walking aids are subject to comprehensive testing by CERAH (Centre for Studies and Research on Equipment for the Disabled). These tests aim to ensure the mechanical and thermal compliance of our products with the NF EN ISO 11334-1 standard.
None of the components used show any permanent deformation or breakage at the end of these tests.
Finally, all our products are designed without phthalates or latex.
Resistance To Fatigue.
A load force corresponding to a maximum user weight of 130 kg is applied one million times to the walking stick at its maximum extension using a dummy arm.
Low temperature fragilisation.
We test the low-temperature resistance of the materials used to manufacture our walking sticks. To do this, the FDI walking stick is weakened by being placed in an environment at -25°C for 24 hours. It is then subjected to a series of drops, which must not reveal any cracks or breaks.
Static load resistance.
FDI walking sticks must be able to withstand a static load of 130 kg without weakening. To achieve this, a load force is applied to the stick at maximum extension using a dummy arm, methodically reproducing a load increase of 1,300 newtons over 10 seconds.
Resistance to seperation.
Separation tests are carried out on our walking sticks to ensure the safety of each assembly. To do this, a tensile force of 500 newtons is applied for 10 seconds to the upper and lower parts of the walking stick. No component of the walking stick must come apart.